G-System is a masterpiece. It asks: what if a guitarist could have it all? And then delivers in a package almost too good to be true. The best of the best effects, complete integration and optimization of your gear and total control over your effects and sounds pedal board. And, the added Massimo Mantovani mod essentially optimises the input-design and upgrades a number of components, which results in a super-transparent tone with a very snappy response, added punch and optimal tonal transparency.
• Instrument Inputs
• Connectors: Two 1/4" phone jack, pseudo-balanced
• Impedance:1 Mohm
• Max. Input Level: 18 dBu
• Min. Input Level for 0 dBFS: -6 dBu
• Sensitivity: -6dBu to +18 dBu
• Loop 1-4
• Connectors: Two 1/4" phone jacks x 4
• Impedance, input/output:91 kOhm/100 Ohm
• Max. Output Level: 12 dBu
• Output Ranges: 6 to 10 dBu
• Insert
• Connectors: Two 1/4" phone jacks
• Impedance, input/output: 24 kOhm(Balanced 35 kOhm)/ 100Ohm(Balanced 200 Ohm)
• Max. Output Level: 12 dBu
• Output Ranges: 6 to 10 dBu
• Analog Outputs (L/R)
• Connectors: Two 1/4" phone jacks
• Impedance: 100 Ohm (Balanced 200 Ohm)
• Max. Output Level: 12 dBu
• Output Ranges: 0 to 10 dBu
• Connectors: RCA Phono (S/PDIF)
• Formats: S/PDIF (24 bit), EIAJ CP-340, IEC 958, 75Ohm
• Sample Rate: 44.1 kHz
• Frequency Response: typ. : +0.0/-0.4 dB, 20 Hz to 20 kHz
• Dynamic Range: typ.: > 95 dB, 20Hz to 22kHz, 0dBFS
• THD: typ.: < -80 dB, 20Hz to 22kHz, -1dBFS
• A to D Conversion: 24 bit, 128 x oversampling bitstream, DSR
• D to A Conversion: 24 bit, 128 x oversampling bitstream, DSR
• EMC
• Complies with:
• - EN 55103-1 and EN 55103-2
• - FCC part 15, Class B, CISPR 22, Class B
• Safety
• Certified to: IEC 60065 / EN 60065/ UL 60065 / CSA E60065
• Environment
• Operating Temperature: 32° F to 122° F (0° C to 50° C)
• Storage Temperature: -22° F to 167° F (-30° C to 70° C)
• Humidity: Max. 90 % non-condensing
• Control Interface
• MIDI: In/Out: 5 Pin DIN
• USB: USB 1.1, type B
• Pedal (Exp and Vol):
- Four 1/4" stereo phone jack
- (2 on GFX01, 2 on Control Board)
• Relay closure (separate tip and ring connection to sleeve): 4 relays on two 1/4" stereo phone jack for amp switching
• Misc
• DC output: 4 x 9VDC outputs, 200mA totally, Shield(+) Pin(-)
• General
• Finish:
- Anodized aluminum front
- Plated and painted steel chassis
• Display: 2x20 character STN-LCD display + 20x7
• Footswitches:
- Dot-Matrix
- 18 Illuminated Footswitches
• (6 with build-in Rotary Encoders)
• Dimensions: 20.2" x 10.5" x 4.1" (512.9mm x 265.9mm x 103.4mm)
• Weight: 17.2 lb. (7.83 kg)
• Mains Voltage: 100 to 240 VAC, 50 to 60 Hz (auto-select)
• Power Consumption: <20 W
• Warranty Parts and labor: According to EU regulations
acg2180
Resto do mundo 
