Audio Technica MICROFONE CONDENSADOR AT4053B
Audio Technica MICROFONE CONDENSADOR AT4053B
499.00€
Não nos foi possivel determinar a disponibilidade deste artigo em tempo real! Saiba a disponibilidade pelo nosso formulário de contacto!
Portes grátis para compras acima de 99€ e abaixo de 100kg, entregas em Portugal Continental
Com a SeQura, flexível e sem complicações.
Obter informações de disponibilidade
Preencha os dados abaixo para receber informações sobre a disponibilidade deste artigo.
Audio-Technica - MICROFONE CONDENSADOR AT4053B:
AT4053b Hypercardioid Condenser Microphone
This versatile studio performer may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. And its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The microphone is fully RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).
The AT4053b consists of two modular subassemblies: an AT4900b-48 body and an AT4053b-EL hypercardioid head capsule (both available separately). Additional interchangeable capsules are available in omnidirectional (AT4049b-EL) and cardioid (AT4051b-EL).
• Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
• Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
• Direct-coupled, balanced output results in a clean signal even under high-output conditions
• Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
• Switchable 80 Hz hi-pass filter and 10 dB pad
• Rugged turned-brass microphone housing for enduring dependability
• State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards
• RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)
• ELEMENT: Externally polarized (DC bias) capacitor
• POLAR PATTERN: Hypercardioid
• FREQUENCY RESPONSE: 20-20,000 Hz
• LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave
• OPEN CIRCUIT SENSITIVITY: -34 dB (19.9 mV) re 1V at 1 Pa
• IMPEDANCE: 50 ohms
• MAXIMUM INPUT SOUND LEVEL: 145 dB SPL, 1 kHz at 1% T.H.D.;
• 155 dB SPL, with 10 dB pad (nominal)
• NOISE: 16 dB SPL
• DYNAMIC RANGE (typical): 129 dB, 1 kHz at Max SPL
• SIGNAL-TO-NOISE RATIO: 78 dB, 1 kHz at 1 Pa
• PHANTOM POWER REQUIREMENTS: 48V DC, 4.8 mA typical
• SWITCH: Flat, roll-off; 10 dB pad (nominal)
• WEIGHT: 127 g (4.5 oz)
• DIMENSIONS: 155.0 mm (6.10") long,
• 21.0 mm (0.83") maximum body diameter
• OUTPUT CONNECTOR: Integral 3-pin XLRM-type
• OPTIONAL INTERCHANGEABLE ELEMENTS: AT4049b-EL (omnidirectional);
• AT4051b-EL (cardioid)
• ACCESSORIES FURNISHED: AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying case
• AUDIO-TECHNICA CASE STYLE: S1
SKU: AUD1954
Pagamento 100% Seguro
Aceitamos os principais métodos:
Excelente loja com atendimento rápido!
— João P.
★★★★★
5.0 / 5
